Gold Member Since 2008
Audited Supplier
Nanjing Foinoe Co., Ltd.

Portable Medical Infusion Pumps, Infusion Pump Manufacturer, Infusion Pump Drop Sensor manufacturer / supplier in China, offering IP-600 I B Hot Sale Portable Medical Infusion Pumps with CE, Hot Sale Ce Approved Cheap Chair Mounted Dental Unit, Electric Operation Table (electric hydraulic) and so on.

(/ )

Supplier Homepage Product IP-600 I B Hot Sale Portable Medical Infusion Pumps with CE

IP-600 I B Hot Sale Portable Medical Infusion Pumps with CE

This product is currently unavailable, but you may contact the supplier directly, for further interest.
Basic Info
  • Model NO.: IP-600 IB
  • Material: Plastic
  • Application: Medical
  • CE: Certificated
  • Specification: CERTIFICATES: CE, ISO13485, ISO9001
  • Type: Infusion Pump
  • Volume: 50ml
  • Certification: CE, ISO13485
  • Trademark: FoiNoe
  • Origin: Nanjing, Jiangsu
Product Description

IP-600 I B Hot Sale Portable Medical Infusion Pumps with CE
1. Flow rate range from 1-2000ml/h.
2. Unique door-free structure and big LCD screen, making it easier and more convenient to operate and in the meanwhile avoiding problems of pump stuck and fluid leakage.
3. Unique function of bedside infusion supervision, making patients and their relatives more assured while also reducing nurses' workload. If used with 2000II and 900I, a bed No. Can be set in the machine and then its infusion status and alarm information can be displayed on 2000II (Infusion Supervision System ) located at Nurse's Station and on 900I (Nurse Beeper). The nurse, upon seeing and hearing the signal, can go and handle the unit accordingly.
4. All brands of standard IV sets are compatible. With only a simple calibration, it can guarantee an accurate, smooth and safe infusion.
5. When detecting air in line or occlusion, an audio and visual alarm signal shall be given instantly while at the same time the machine stops operation automatically, thus reducing the danger of air embolism to patients.
6. The infrared sensor shall give alarm signal when detecting excessive air pressure.
7. Application of double CPU, making the infusion process safer and more reliable.
8. Alarm signals are given in case of malfunction or operation error and the machine stops operation automatically.
Model 600IB   Max.size of outer shell 120*140*190 mm(length*width*height)
Bolus 2000ml/h Alarm functions Over,OCCL.,AIR,low battery, control abnormal, no AC power supply, installation error.
Flow rate range 1-2000ml/h Displayed information Rate, volume limit, accumulated volume, power indicator light, bed No.,AIR,OCCL.,OVER.
Volume limit 1-9999ml Max.weight <2.0kg
Accuracy ±3% Classification Type II,BF
KVO flow rate  1ml/h,keep vein open(KV))rate Outer shell material ABS plastic
Max.power
consumption

25W,can run for more than 5 hours continuously after being fully recharged.
Operating conditions  Environment temperature +5°C~+40° C,atmosphere pressure 86~106kPa, relative humidity20%~90%
Power supply  AC100-240V,50/60 Hz,25VA Storage and transport conditions  Environment temperature -15°C~+50°C,atmosphere pressure 86~106kPa, relative humidity20%~90%.
Battery  Rechargeable lithium polymer battery,7.4V,1650mAh Applicable infusion set  All standard infusion sets.
Certification CE0197 EMC Comply with EN60601-1-2
Work mode  Continuous work mode  Fuse 220V 2A*2,  12V 2A*2
Water proof IP21 Electrical Shock Proof Battery:Class II:AC Power:Type BF.
Battery recharge  When the pump is connected to the AC power supply, turn on the power and the battery will automatically recharge (about 8-14 hours to recharge fully). Applied standards  Comply with standard of EN ISO 14971:2000,IEC 60601-1:1995,EN IEC  60601-1-2:2001,IEC 60601-2-24,EN ISO 14155-1:2003,EN 980:2003,EN 1041:1998,MDD 93/42EEC

Send your message to this supplier
Avatar
Mr. Bob Jiang
Director
*From:
To: Mr. Bob Jiang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category